India's waste metal recycling and utilization industry is due to many historical reasons, such as late start, short development time, lack of experience, and the complexity of the waste metal recycling industry itself (waste metals are divided into recyclable domestic waste and industrial solid waste by source, and can be subdivided into more than 100 categories by metal type and form, and the recycling and processing of each type of waste metal has corresponding pricing standards and precautions), The problem of industrial management confusion is gradually highlighted in all aspects of the industry. For example, according to the current directory of classified management of industrial waste and domestic waste recycling, recycling and processing of waste hardware requires an environmental assessment report, which belongs to the comprehensive utilization of waste resources, while recycling and crushing of waste metals requires an environmental assessment report, which belongs to other categories of general industrial solid waste (including sludge) disposal and comprehensive utilization.
However, the speculators who exploit loopholes in administrative regulations and relevant laws and the vicious competitors who suppress producers in the same industry by means of violent involvement in mafia, which breed at the intersection of the two, not only bring a lot of trouble to the examination and management of industry problems, but also make it very difficult for new practitioners who join the waste metal recycling industry to obtain relevant industry licenses and legal operators to apply for legal protection after being subjected to vicious competition.
The development of the recycling and utilization industry of waste metals is largely based on the traditional development of individual households and small and medium-sized enterprises. The amount of capital injected is small and the investment time is late, so the waste metal recycling industry has serious dispersion, blindness and backwardness. At the same time, due to the variety of industries involved and the ambiguity of responsibilities between relevant departments, this problem cannot be solved for a long time, which leads to many problems such as low recycling efficiency of waste metal resources, serious pollution during production and processing, and serious waste of resources. In addition, due to the lack of unified and strict technical standards and product quality standards in the recycling industry of waste metal resources, the product quality of various enterprises was uneven at the same time, and the product quality of the same enterprise was not uniform at different times. What is more serious is that some electronic manufacturers directly renovate the waste parts of the same kind of foreign products, replacing them with inferior ones, cheating consumers, and using the "three no" products made of waste metal in the food and drug industry without health review and quality testing.
At present, India's waste metal recycling industry mainly relies on a large number of private enterprises for production and processing, including a large number of small and medium-sized enterprises. Such enterprises are decentralized and limited, and the industry management is negligent, which leads to the problem of long industrial chain in the waste metal recycling industry. Taking the import of scrap metals as an example, the scrap metals provided by foreign scrap metal suppliers need to be transferred to importers by traders, distributed to agents by importers, transported to designated ports by agents, disassembled by designated companies, sorted and refined by recycling companies, and finally transported to metal processing plants for further processing into industrial products. This period does not include customs clearance, environmental assessment, quality inspection and other procedures. The complex industrial process and the recycling industry of waste metals are the characteristics of a cyclical industry, which lead to increased fluctuations in the prices of raw materials and products in the industry, and increase the hidden risk burden of industry operators. Moreover, problems in any link of the industry chain will affect the entire industry chain and seriously affect the development of the industry. Therefore, it is of great significance to streamline the long industrial chain and accelerate the recycling process of waste metals.
It is the most important thing to select foreign high-quality factories in advance. Now there are many metal processing factories, and there are many price differences. If you want to process metal products, you can contact Yantai Chenghe Engineering Machinery Co., Ltd., which is a Chinese enterprise specializing in processing sheet metal, aluminum alloy, carbon steel and other materials. Located in Yantai, China, it is a large metal processing factory in northern China, providing you with comprehensive product services.
Our capabilities will meet your needs for:
1. Manufacturing of aluminum and zinc die casting molds and gravity die casting molds.
2. Alloy composition casting.
3. Traditional processing parts. It provides multi axis and multi-function drawing and tapping processes.
4. Prototype, short version and series products.
5. Hardware product surface coating, screen printing, electroplating, sandblasting, anodizing, powder spraying, etc.
6. Assembly and packaging. You can go to the factory to inspect the environment and production equipment, and hope to cooperate with you.
Post time: Sep-22-2022