Mobile Phone
+86 15653887967
E-mail
china@ytchenghe.com

Metal scrap and scrap processing and action

5a781ab288420072907f7a1a1234471

The scrap metal scraps after machining can be recycled to smelt castings again, or recycled to smelt high-quality steel, which need to be pressed into high-density cakes by the scrap iron briquetting machine; Directly put into smelting will not fully melt, but also increase smelting time; The equipment adopts the principle of hydraulic molding, without adding any adhesive, and can be directly pressed into 3-10kg cylindrical or square cakes.

The metal chip briquetting machine is applicable to various metal chips, cast iron chips, ball mill cast iron chips, sponge iron, iron ore powder, cast iron cutting scraps and other raw materials, and is widely used in mechanical processing, processing workshops, steel casting plants, waste metal recycling stations, etc.

1. The metal chip briquetting machine adopts the advanced PLC hydraulic power transmission scheme, which has a high degree of automation, greatly reduces the labor intensity of workers, and improves the output of products;

2. The body is made of cast steel, which improves the strength and stiffness, enhances the stability of the equipment, makes the machine run more smoothly, and extends the service life of the machine;

3. The highly centralized hydraulic valve block and unique oil circuit design accelerate the operation speed, ensure the production demand of users, and improve the product quality with large molding pressure;

4. Cast iron briquetting machine has high technical content, fully automatic control, low failure rate, small heat generation, high productivity, power saving and durability, reducing production cost;

5. The hydraulic forming cost of the iron chip pressing machine is low, and the cost resources are saved.

The metal chip briquetting machine can cold press the metal waste into a unified shape under large pressure, which greatly facilitates the storage, transportation, recycling and reuse of metal waste. It is mainly used to manufacture aluminum chips, iron chips, copper chips, steel chips, etc. produced in the processing of aluminum products, iron castings, iron products, copper products, etc. The metal chip briquetting machine is used to process various metal chips into circular cake shaped metal blocks with uniform specifications. This treatment can not only effectively save the space resources of the factory, but also fundamentally solve the environmental problems, thus creating a clean and tidy factory environment.

The research shows that recycling an abandoned aluminum can can can save 20% of the capital and 90%~97% of the energy than manufacturing a new one. The recovery of 1t waste iron and steel can produce 0.9t good steel, which can save 47% of the cost compared with smelting with ore, and also reduce air pollution, water pollution and solid waste. In countries with more developed industries, the scale of renewable metal industry is larger, and the recycling ratio of renewable metal is higher. If we can reduce the use of original mineral resources and use waste metals more effectively, it will reduce a lot of resource burden for our country.

57f3c01cfaecc1cc31fe6d65a250a0b
a4875ab70a0fbf20893f29afce18105
c8c02f359bece066d8031a0cf00d863
c659498deaff75b6a15e316c9b35f3b
fa59ca1e17c4075f6cca51713b632ff

Post time: Nov-07-2022